- Full EPS production line
- 2017-12-25 20:06
- PRODUCT DESCRIPTION
Do you supply turn key project?
Yes. Usually we supply turn-key project, we' ll dispatch engineer to go there for guiding the assembling and training
workers until your factory runs normally.
How long will it take for ma...
- Foam Cutting Tools
- 2017-12-08 09:06
- For some special EPS decorative goods, if only by EPS CNC cutting machine ,it can not finish. We can consider to use Manual EPS cutting tools.
We manily have two kinds manual EPS cutting tools. One is used for cutting line, the other is used for c...
- Concrete block
- 2017-12-06 16:30
- Advantage of concrete block
1. Use construction waste or industry waste, save energy.
2. Raw material can be got easily
3. Protect environment
4. High tensile strength , Not afraid of water, resistance to weathering, corrosion, freezing and tha...
- Vertical 3D Panel Machine
- 2017-12-05 16:55
- FAQ
Can you supply horizontal type 3D panel machine.
Yes, we can supply. But we recommend vertical 3D panel machine.
What is the advantage for vertical 3D panel machine?
How can I get an effective offer?
Firstly pls confirm if the...
- 3D panel fence
- 2017-12-05 07:51
- PRODUCT DESCRIPTION
3D panel fence
3D panel fence also named Climber Trellis Mesh, it is a three dimensional galvanized welded wire trellis system. It consists of two pcs of welded mesh on the top and bottom. Between the welded mesh, it is zi...
- Stair Panels
- 2017-11-19 23:45
- PRODUCT DESCRIPTION
EPS 3D STAIRS PANEL (MODULE)
EPS 3D stairs module is a shaped EPS core, it is covered by two welded mesh joined by connector.It must be reinforced and concrete on site....
- Steel Bar Stirrups Bender
- 2017-11-08 23:23
- FAQ
1.Where is your steel bar processing factory located?
In Henan Province.
2.What is delivery time?
Usually 10-15 days.
3.What is your factory production capacity?
We produce 14000 sets machines per year, every day 40 sets or so.
4.How c...
- 3D panel house
- 2017-11-03 15:00
- What is the benefit for 3D panel building system?
1.low cost
2.Simple installation,shortening of construction time
3.Thermal and sound insulation
4.Durable or low-maintenance
5.Environment friendly
6.Recycled green products
7.Fire & Mois...
- Zig Zag type EPS 3D panel
- 2017-10-26 13:19
- PRODUCT DESCRIPTION
ZIG ZAG TYPE EPS 3D PANEL Specifications:
Mesh wire:
2-2.8mm galvanized or non galvanized.
Mesh opening(mm) :
50 x 50, 75 x 75 and 100 x 100.
Truss wire:
2-2.8mm galvanized or non galvanized.
Panel:
1220mm.
Panel l...
- 3D panel
- 2017-10-26 10:52
- EPS 3D panel consists of an expanded polystyrene panle(usually called EPS panel) sandwiched between two pc of welded reinforcing mesh of high tensile wire. Truss of steel wire piercings the EPS panel and welded to the welded fabric at an angle.
T...
- EPS concrete sandwich wall panel
- 2017-10-22 10:15
- EPS concrete sandwich wall panel types:
China EPS cement Sandwich panel
EPS cement sandwich panel for modular home
EPS concrete sandwich panel
Fire retardant EPS foam sandwich panel
Light weight partition EPS sandwich panel...
- Rebar Bending Machine
- 2017-10-22 02:31
- Application
Rebar bending machine, steel bar bender, steel bar bending machine is an equipment for bending thread steel bar, smoothly steel bar, flat steel, square steel and angle steel. Rebar bending machine is able to bend steel bar with diame...
- 2D EPS CNC Cutting Machine
- 2017-10-11 09:50
-
Parameters:
Cutting speed: 0-100mm/s
Drawing software: CAD/CAXA
Cutting error: <1mm
Power:220V 50HZ 1PH
Size:1600 x 1100 x 1100
Special size can be made according to customer’s requirement.
Advantage comparing wi...
- Continual type EPS Pre-expander
- 2017-09-28 11:11
- PRODUCT DESCRIPTION
With continuous pre-expanders, the raw material feeding into the pre-expansion tank as well as the foaming process run "continuously"
Features
1.Resin Hopper Capacity for different capacities
2.Fluid Bed Dryer with he...
- EPS Recycling System
- 2017-08-19 16:06
- PRODUCT DESCRIPTION
EPS (Expanded Polystyrene ) recycling machine
In the EPS production, sometimes we’ll leave some wasted EPS. By EPS recycling system, the recycled EPS, material can be reused in shape moulding production in a ratio of at le...
- Automatic EPS Block Cutting Machine
- 2017-07-26 17:26
-
PRODUCT DESCRIPTION
Automatic EPS block cutting machine
Function:
1. The frame of the machine adopts high quality square and profiled bar with fastness configuration, with good intensity, metabolic and good shape.
2. Th...
- 3D panel production line
- 2017-07-21 12:21
- PRODUCT DESCRIPTION
Do you supply turn key project?
Yes.Usually we supply turn-key project, we’ll dispatch engineer to go there for guiding the assembling and training
Workers until your factory runs normally.
How long will it take for manu...